VCF 85 is a simple, compact and affordable clean-out unit that works at a speed of 1.2 m per minute. It uses gum designed to handle N94-VCF violet chemistry-free plates.
Reduce your system cleaning time and eliminate classic processing chemicals. How? By using the affordable VCF 85. Your violet chemistry-free plates are cleaned out with more efficiency than ever before. Quick and clean: important for newspaper printers looking to streamline, simplify and reduce costs.
Chemistry-free operation increases the green credentials of any newspaper printer keen on minimizing its environmental impact.
For violet photopolymer plates with pre-heat, prewash, developer, wash, gum and dryer steps. Very accurate hot-air preheat concept. Easily converted for violet chemfree technology. Prepared for full unattended operation and can be used in an automated prepress line. Fully integrated with both CtP and post processor plate automation. Smaller footprint, targeting customers in the medium segment
A simple solution intended for customers who process violet photopolymer plates. Reuses technology and principles from the high-end processors, but is offered with a more basic configuration. Satisfies the requirements for simple, yet consistent and reliable processing
The clean-out units Azura CX 85, CX 125 and CX 150 are showpieces of Agfa Graphics’ expertise. Their cascading clean-out technology enables you to handle more plates, with lower waste costs. The pH-neutral water-based gum circulates between two shallow trays, which raises the clean-out efficiency and reduces gum consumption. It also lengthens the bath life up to 7,000 m2.
Choose your model: connected online with the plate setter, or stand-alone. There’s no need for a developer or replenisher and everything is pre-set. So once the Azura CX clean-out unit is installed, you’re good to go: the unit is designed to handle up to 50,000 m2 of plates a year!
The Azura C65 is Agfa’s first table-top clean-out unit (COU) for its thermal chemistry free offset plate :Azura TS. The C65 COU supports plate widths up to 65 cm (25.5 inches) and provides the stability, ease-of-use and eco-friendly, chemistry-free plate-making to the small commercial printer. This cost-effective solution is ideal for a small commercial printer looking for a chemistry-free alternative to a chemical-based, plate-making process.
After a plate has been imaged, the Azura C65 enables the clean-out of the non-imaged plate areas by using a circulating gum solution. Based on Agfa’s proven Thermofuse technology, plate-making with Agfa’s chemistry-free plates and clean-out unit is a physical process, eliminating chemical processing, the main variable affecting image consistency. It has a self-contained circulating system, so it does not need an external water connection, nor is plumbing required.
For traditional thermal plates with developer, wash, gum and dryer steps. Prepared for full unattended operation and can be used in an automated prepress line. Fully integrated with both CtP and post processor plate automation. Raptor+ combines reliability, flexibility and automation to meet the needs of any customer in the medium segment. Smaller footprint, targeting customers in the medium segment.
Based on Glunz & Jensen's rugged and renowned Quartz Supreme series. For customers who require robustness combined with convenient electronic features. Fulfills International Safety Standards. Available in two widths: 86 and 125 cm (33.9 and 49.2”).